There is nothing quite like sitting on your porch during a relaxing evening after dinner. Especially if you’re trying to dodge mosquitoes and other nasty little insects. While you may not be able to completely get rid of these insects, there is a way to easily create your own screened in porch and you don’t even need a lot of experience. Most anyone can do this, and it’s well worth the time and effort.

Before you get started, you’re going to need some tools and materials. First, you’ll need enough screening material to completely screen in the porch. Get your square foot measurements and go to your local hardware store for the material. While you’re there it’s also helpful to pick up a utility knife for trimming the screening material.

You’ll Need:

• screening
• framing wood
• chalk
• utility knife
• nails
• hammer
• level

Mark off the area that you want to screen in with your chalk. Try to draw as straight of a line as possible since you will be using this as your guide for your new screens. If your porch already has a roof, you’re already half way done. If not, you’re going to have to add one. Unless you have experience roofing, it is a good idea to call a professional to have this done. This is the only step that requires any professional assistance however.

Once your roof is up, you can begin adding your framing wood. Attach the wood at the top and bottom using screws for a secure fit. Make sure you use that level to plumb and level each piece while you’re at it. Your boards should be placed about four feet apart, or at the most, six feet. When you have the whole perimeter of your porch framed in, you’ll be able to start adding your screening material. Don’t forget you should have a door leading outside for your porch, to make it safe. Frame this in and either make your own screen door, or purchase one from the hardware store.

Cut the material to fit your frames and make sure the edges are nice and neat. You can use the utility knife to get a good, clean edge. Keep in mind you may need to go over it again once it’s installed to clear up any rough edges. Nail in the screening material to the frames, taking special care to avoid any gaps. If you do have an area that has gaps, take some thread that matches the screening material and sew the two pieces together. This is an easy fix that gets quick results.

Once your screening material is in, you’ll want to clean up the rough edges and make sure that everything is secure. You can now sit back and enjoy your time outside without having to swat at bugs. This is an easy project that shouldn’t take more than a weekend to complete if you have basic DIY experience.

Photo Credits: 1

If you liked this article, vote for it on del.icio.us and stumbleupon.

Have you always wanted to tackle home improvement projects on your own but you weren't sure where to start? The Do-It-Yourselfer's Ultimate Guide to Home Improvement has all the answers you need! Click here to download the 30 page the 100% FREE eBook "The DIY Handbook."

If you prefer a real book, this book can be bought as a paperback from LuLu.com for $10.93.

Categories:

Handy Man, Install, Porch, Screen

Tags:

chalk, dodge, foot measurements, four feet, framing, hammer, Hardware Store, insects, mosquitoes, nails, perimeter, Porch, professional assistance, roofing, screening material, screws, six feet, square foot, tools and materials, utility knife

Related Articles

• Top Five Ways To Increase the Value of Your Home

• Landscaping 101

• 10 Most Common Mistakes of DIY’ers

• Ortho’s Home Repair Problem Solver By Robert J. Beckstrom, Jeff Beneke, Matt Phair, Naomi Wise

• What’s In Your Crawlspace?

Related Stores

• Insects, Amber Fossils Rocks, Fossils, Minerals Collectibles

• Evening Bags Handbags

• Evening Womens Shoes

• Dodge American Automobiles Advertising Collectibles