If you’re sick and tired of your old kitchen sink, replacing it with a new one is not all that difficult. If you’re working with an entirely new surface, the steps for installation will be the same as provided below, but you will need to add the steps of measuring the sink and cutting in a new hole in your countertop. Most sinks now come with a template to make this easier. For the purpose of this review however, we’re going to stick with working on a replacement sink that is the exact size and shape of the old sink. If you do find that there is a size difference, you can use a saw to cut the countertop to fit.
Before we get started, you’re going to need some basic tools:
- saw (as mentioned above)
- pipe wrenches (appropriately sized for your pipes)
- screwdriver
- crowbar
- power sander or sandpaper
- pliers
- empty bucket
- silicone caulk
- plumber’s putty
- caulk
- clamps
- gloves
Turn off the water supply to the sink before proceeding any further.
Once you’ve got all of your tools organized, you’re ready to get started. Before you begin however, re-measure everything to make sure that the new sink will fit. If you still need to remove the old sink, first you will need to use your wrench to loosen the p-trap. That’s the U shaped pipe under the sink that connects the plumbing to the drain. It’s a good idea to completely remove everything under the sink to ensure that you have enough space to work and that nothing gets ruined. Place your empty bucket under the p-trap to catch any excess water.
Your old sink was most likely installed with putty or adhesive of some sort. Use your crowbar to carefully remove the sink from the counter. Lift it out and place it aside. You may need to get some help since sinks are a bit heavy. Sand any rough areas that are around the hole where the sink used to be. If you are keeping your old faucet and it’s not attached directly to the sink, re-silicone it to make sure you won’t have any leaks. If you’re replacing it, remove the old one by loosening the fittings under the counter with your pipe wrench.
You’re now ready to move to the next step. Unpack your new sink. Place plumber’s putty around the edges of the hole where the sink will go. Lift up the new sink and carefully place it into the hole. Make sure it is completely lined up and fits well before proceeding. Now, clamp it down and give it enough time to dry. If any putty squeezes out, use a damp cloth to wipe it away. Attach your new faucet, or re-attach the old one and caulk around the area. It is also a good idea to caulk around the outside edges of the sink. When it’s dry, you can sand it down to make it look better. Reconnect the p-trap and you’re all done!
Photo Credits: 1
Related Articles Related Stores
Warped flooring is a major problem for many homeowners. First, it is typically caused by water damage, and can be indicative of a major leak, but it can also be caused by excessive wear, poor original materials or even chance. Warped floors are a bit of a hazard around the house and should be fixed as soon as possible. Let’s go over a few easy ways that you can get this job done.
