November 10th, 2008 — Handy Man, Install, Kitchen, Sink
If you’re sick and tired of your old kitchen sink, replacing it with a new one is not all that difficult. If you’re working with an entirely new surface, the steps for installation will be the same as provided below, but you will need to add the steps of measuring the sink and cutting in a new hole in your countertop. Most sinks now come with a template to make this easier. For the purpose of this review however, we’re going to stick with working on a replacement sink that is the exact size and shape of the old sink. If you do find that there is a size difference, you can use a saw to cut the countertop to fit.
Before we get started, you’re going to need some basic tools:
- saw (as mentioned above)
- pipe wrenches (appropriately sized for your pipes)
- screwdriver
- crowbar
- power sander or sandpaper
- pliers
- empty bucket
- silicone caulk
- plumber’s putty
- caulk
- clamps
- gloves
Turn off the water supply to the sink before proceeding any further.
Once you’ve got all of your tools organized, you’re ready to get started. Before you begin however, re-measure everything to make sure that the new sink will fit. If you still need to remove the old sink, first you will need to use your wrench to loosen the p-trap. That’s the U shaped pipe under the sink that connects the plumbing to the drain. It’s a good idea to completely remove everything under the sink to ensure that you have enough space to work and that nothing gets ruined. Place your empty bucket under the p-trap to catch any excess water.
Your old sink was most likely installed with putty or adhesive of some sort. Use your crowbar to carefully remove the sink from the counter. Lift it out and place it aside. You may need to get some help since sinks are a bit heavy. Sand any rough areas that are around the hole where the sink used to be. If you are keeping your old faucet and it’s not attached directly to the sink, re-silicone it to make sure you won’t have any leaks. If you’re replacing it, remove the old one by loosening the fittings under the counter with your pipe wrench.
You’re now ready to move to the next step. Unpack your new sink. Place plumber’s putty around the edges of the hole where the sink will go. Lift up the new sink and carefully place it into the hole. Make sure it is completely lined up and fits well before proceeding. Now, clamp it down and give it enough time to dry. If any putty squeezes out, use a damp cloth to wipe it away. Attach your new faucet, or re-attach the old one and caulk around the area. It is also a good idea to caulk around the outside edges of the sink. When it’s dry, you can sand it down to make it look better. Reconnect the p-trap and you’re all done!
Photo Credits: 1
Related Articles
Related Stores
October 21st, 2008 — Handy Man, Maintain, pipes, plumbing
If your home, apartment or some other building is suddenly experiencing a water leak, then repairing the fixtures, the faucets and the pipes can become extremely urgent in no time at all. You may be able to do some of the repair work yourself, but in most cases it is much more wise a decision simply to bring in Joe the Plumber. Joe the Plumber is your average home plumber, willing to come right to your home or business to tackle a plumbing problem that is deemed to be beyond your capabilities as a home handyman or woman.
If you discover that there is a leak, the first thing that you should do is to shut your water off while you wait for Joe the plumber to arrive. This will prevent any further water damage from occurring just in case hiring a plumber takes a little bit longer than you initially anticipated. The quickest way that you can stop water from leaking from your pipes is to go to the main valve and shut the water supply off there. Then you can go to one of the lowest points in the home or office building and open up a faucet, allowing the remaining water to drain out of the faucet based on gravity, which will significantly minimize the water escaping through the leak until Joe the plumber can arrive.
When Joe the Plumber does arrive, ask him or her how recurring problems can be prevented or avoided in the future. Most plumbers will charge an hourly rate for their service, along with any and all necessary parts costs. You can expect to pay somewhat more money for calls at night or during the weekend. Even at these rates, it is smart to consult with your plumber about repairs and parts options, as well as how future problems can be kept from reoccurring. The more you can learn about the intricacies of your home or office plumbing, the more likely you will be able to solve the problem your own self the next time.
When you decide that you need to hire a plumber, it is definitely going to be most reasonable to hire someone who is reputable and licensed. You should also try to appraise hourly rates beforehand, choosing a plumber that has an hourly rate that agrees with your budget. For example, some plumbers have lower rates on an hourly basis but charge for things like driving time, and others have a higher rate for hourly work, but the clock only starts when they arrive at the scene of the crime. Make your decision based on the rate you feel most comfortable paying, and do not be afraid to have a Joe the plumber on hand so that you can get the help that you need when you need it. Make sure that your plumber is validly licensed in your state if it is required, and keep their phone number of hand so that if a plumbing emergency occurs, you can do something about it.
Photo Credits: 1
Related Articles
Related Stores
July 25th, 2008 — Book Review, Project
When it comes to dealing with the authority on home improvement, you can’t much better than Better Homes and Gardens. For decades they have been helping and inspiring home owners throughout the world. Let’s see if their latest book is worth the money and if it can help you with those nagging projects you need to finish around your home.
This is a massive tome of nearly 1000 pages so you can tell right off the bat that you’re going to be dealing with quite a few projects and advice. More than 4,000 color illustrations are included in this book that weighs nearly 5 pounds and each one takes you step by step through the process of completing these project successfully.
We liked the fact that the book is written so that even a novice can open it and get to work feeling confident. While there are a few projects included that are more suited to DIY pros, most can be completed by anyone with a minimum of experience. You really don’t even need to be “handy” to complete most of these, so this moved the book up high in our estimation. Not everyone is a natural born fix-it person, and it is nice to see a book focus on making home improvements easy.
Practically anything you could ever do in your home is covered, from building a deck to enjoy the outdoors to fixing that incredibly annoying faucet. 200 step by step projects are provided and there is also a section on quick tips for common issues in your home. Each project lists what tools you are going to need and the techniques you need to use the get the job done. You can easily make a project shopping list with this information to make it easier to get exactly what you need before you get started.
The book was based on the magazine’s popular Step by Step column and they stay true to this format. Instead of having to wait every month for a new project however, you’ll get them all at once. We found that it was well suited for the weekend warrior that needs to know exactly what each project is going to take in terms of material and time. We can’t all rip apart our houses and spend weeks putting them together, so this feature was definitely appreciated.
Overall, if you are planning some home improvement projects or you would just like to know more about how to fix things in your home, this is a terrific book. It is a little pricey, but when you think about the sheer size and the work that went into putting this together, it is well worth it. We highly recommend this title and it would make a great gift for anyone on your list that is interested in home improvement, or for yourself! Chances are, you’ll want to jump in right away and start fixing up your home after you read it.
Related Articles
Related Stores
July 21st, 2008 — Handy Man, Install, Kitchen, Sink, filtration unit
No matter where you live, there is a chance that you may be dealing with some contaminants in your water. Many of us have trace amounts of lead in our drinking water and this can be harmful to your health over time. It is a good idea to have your drinking water checked for any contaminants, especially if you live in a rural area and use your own well.
One of the easiest solutions to getting clean water is to install a filter at the tap level. However, this can get pretty old since you can’t run hot water through it and the filters can be expensive over time. If you want an easier solution, there is a type of permanent water filter that can be installed under your sink or even at the source of your water, to filter everything that goes through the faucet.
Whole house filters are an excellent investment and you’ll have the peace of mind knowing that you are bathing and drinking in clean water. However, if this is out of your price range, a simple filter that is installed under your sink can be a great alternative. Your number one priority is making sure that your drinking water is clean, so let’s look at how to install one of these filters under your sink.
Most of today’s newer filters may include a special faucet, but these can be pretty complicated to install. It is easier to pick a filter that will just use your existing fixtures. First, you’re going to need to turn off the water supply to your sink. If you don’t have a shut off valve there, you may need to turn off the water supply to your home instead. This can usually be found near your water pump.
Once the water supply is turned off, get under your sink (removing anything that may be under there) and locate the saddle valve. This is a small valve that should be located under the shut off valve. Open this up and get your filtration unit ready. It is a good idea to follow the unique instructions that come with your filter, but this is a general guideline for most filter installation procedures.
Attach the filter in between the saddle valve and the main valve. Make sure that it is located on the cold water valve since you don’t want to run hot water through the unit. Once the unit is in place, close off the valve again and install the carbon filter. These units typically have a much longer lifespan than the smaller faucet based filters, so even though you are using a carbon filter, you won’t have to change it as often.
Make sure that all of your connections are tight and turn the water supply back on. Depending on the unit, you’ll want to run at least two gallons of cold water through your tap before it is safe to drink. This is due to the little bits of carbon that can come through when it is brand new.
Photo Credits: 1
Related Articles
Related Stores
