November 19th, 2008 — Garden, Handy Man, plants
If you have a container garden that you’ve been carefully tending all summer long, it’s time to start thinking about what you plan to do with it for the rest of the year. Depending on the types of plants you have, you may be able to enjoy them all year round, simply by bringing your container garden inside. It’s easier than it sounds and with the right materials, you’ll be able to enjoy your garden, even if it’s thirty below.
The first step is to clear out a space in your home where you can place your plants. If you have several, you may want to consider using nesting tables, or a terrace system to help make the most out of your space. Ideally, the plants should be placed near a southern window where they will be able to get the most natural light. However, it is a good idea to make sure that the window does not have any gaps that let in cold air.
Once you have your place picked out, you can start either adding small tables or you can put down a rug to keep your floor safe. It’s not a good idea to place your pots right on the carpet or on wood floors since they may leave stains. If the plants need a lot of water, you may want to consider placing waterproof material down on the floor, under where the pots will be kept. This will keep your flooring safe and make it easier to clean up.
If you don’t have a southern window with good exposure, or you simply have too many plants, you can try placing them around your home in different locations. Many people like to use an extra bathroom for plants since this a little more humid environment and will help your plants stay healthy. If you are dealing with limited space, it may be harder to bring your container garden inside, but with some careful planning and space saving, it can be done. At the very least, you can save your favorite plants.
Once you’ve got your container garden inside, the plants may need a little time to adjust to the air in your home. A humidifier will help keep their soil moist and you may need to water them more frequently when you first bring them in. Light is very important in order to keep them growing, so if you don’t have natural light, you may need to use lamps and overhead lighting to keep them healthy.
Although it is a little extra work, bringing your container garden inside is a great way to keep the winter doldrums at bay and keep your plants healthy all year round. Even if you bring in only one plant, you’ll still have a little piece of summer to get you through the cold grey days that are ahead. Give it a try and see how much fun it can be to have plants around you all year long.
Photo Credits: 1
Related Articles
Related Stores
November 14th, 2008 — Aesthetics, Cabinets, Countertops, Flooring, Handy Man, Kitchen, Low Budget, Project, Renovate, Sink
Remodeling your kitchen can dramatically increase the value of your home. Whether you are trying to sell your home or you just want it to look nicer, there are a lot of options you can use when remodeling your kitchen. Before you get started, you’re going to want to come up with a budget and then determine how you want to spend it. For the purpose of this article, we’re going to discuss some basic options such as replacing countertops, sinks, cabinetry and flooring. The amount of work your kitchen needs is completely up to you and your budget.
First, let’s discuss new countertops.
There are numerous different surfaces out there that range from really cheap (formica) to very expensive (poured slabs). You’ll need to think about how you normally use your countertops before picking the new surface. Formica is pretty durable, but it is easy to stain. Marble looks terrific, but does have some maintenance issues. Poured surfaces are costly, but last the longest and need the least amount of care. Try to get some samples of various surfaces before you decide which one is right for you. For a compromise, try marble tiles. They’re cheaper than marble slabs and easier to install.
For your new sink you’ll also have quite a few options.
Most are easy enough to install, and come in sizes that will fit most existing installations. If you’re completely replacing your countertops, you’ll have more options when it comes to the kind of sink you can use. When picking a surface, remember that stainless steel looks nice but can be hard to keep shiny. Ceramic is a good solution, but make sure that it is properly sealed to reduce the amount of scrapes that can come with normal daily use.
New cabinets can be pretty exciting, and again, you’re going to have a lot of new options here.
Glass doors add a touch of class to any new cabinets, and you can add some variety by having a few with solid doors and a few with glass. If you can’t find the stain or color you like, get some unfinished cabinets and stain or paint them yourself. If your budget won’t allow new cabinetry, you can still overhaul existing cabinets by replacing doors, adding new hardware or simply giving them a fresh coat of paint or a stain.
When it comes to floors, the sky is the limit.
There are so many options right now it can be hard to decide which one is best. Many new kitchens feature poured concrete floors that are then stained to match the décor. However, this is expensive and labor intensive. If you’re remodeling on the cheap, you can find peel and stick tiles that can go on above your existing floor. This is a very easy and economical way to jazz up your kitchen with very little effort.
When remodeling your kitchen, try to figure out how much work you can do on your own. If you’re handy, you can save a lot of money that can be used for better fixtures or options, if you do the work yourself.
Photo Credits: 1
Related Articles
Related Stores
November 12th, 2008 — Flooring, Handy Man, Tile
There is nothing quite like a tile floor. They look nice, they’re pretty easy to maintain and they are reasonably easy to install. You need only a basic amount of do it yourself experience to lay your own floor and it can give you a great feeling of accomplishment when you’re done. You will need a few tools and materials to get started. They include:
- caulk
- floor cement
- lathe
- scraper
- the tiles
- a wetsaw or tile snipper
- some gloves
We also recommend knee pads since you will be spending a lot of time kneeling on the floor and since tiles are hard, this can get pretty painful after awhile.
You’ll need to decide whether to rip out your old floor or put your tile above it. We recommend completely removing the old floor for the best results. If it is an old tile floor, you’ll need to spend some time chipping and chiseling away. For carpet, pull up the carpet and pad, to reveal the subfloor underneath. Sweep up any debris and sand down any rough spots. For floors with linoleum or peel and paste tiles, you’ll need to rip all of these up. It’s actually more work to remove the old flooring than it is to lay the new one, so don’t worry, it gets easier from here.
Once you’ve got the floor bare and prepared (ie: sanded, scrubbed and swept) you’re ready to start. Remember, you don’t want to cement yourself in a corner. Don’t get too carried away - just take it one row at a time. By taking your time and laying each tile carefully, you’ll be a lot happier with the results. Measure off each row and determine how many tiles you’ll be using. This will change since there will be some space in between, so don’t cut any tiles to fit just yet.
Mix your cement and spread it on the subfloor for the first row. Take your first tile and carefully place it into the cement. Press down firmly and move to the next tile. You should leave a little room in between each, but no more than ½ an inch. Put this tile down and continue until you reach the end of row. Ideally, it will be a perfect fit, but this rarely happens. Measure off the space and then either cut the tile in the wetsaw or use your snipper. Place this piece in and move to the next row.
Keep going until you have the whole room finished. If you’re going around curves or fixtures, you may want to get a template to make cutting the tile easier. Plan this out ahead of time so you don’t end up with any surprises. The amount of time it takes for the tile to set will depend on your cement. Make sure that you follow the instructions and leave the floor alone to cure - no activity on it until it is done! Caulk any sides that may come into contact with water, and if necessary, caulk any gaps in between the tiles.
Photo Credits: 1
Related Articles
Related Stores
October 15th, 2008 — Fix, Flooring, Handy Man, Wood Floors
Warped flooring is a major problem for many homeowners. First, it is typically caused by water damage, and can be indicative of a major leak, but it can also be caused by excessive wear, poor original materials or even chance. Warped floors are a bit of a hazard around the house and should be fixed as soon as possible. Let’s go over a few easy ways that you can get this job done.
Small Warps
These are tiny little warps that are usually barely noticeable. Commonly, if you found a leak in time, or are paying attention, you can spot this type of warp while it is still small and easy to fix. If the average area is less than six inches in diameter, and the boards affected are not numerous, you can try a very easy fix.
Get a cinderblock, or something similar that is very heavy. Wet the area where the warping occurred slightly and then place your heavy object over the warp. Give it a few days and check to see if the warp is gone. If you are using something heavy enough and the floor is still pliable, chances are your warp will be gone. This is a great fix if you are on a budget.
Medium to Large Warps
This is a little more serious and may require spot fixing. In a perfect world, only one flooring board will be warped, but often, it will usually effect more than one. Locate the area where the warping occurred and if necessary, fix the problem that caused it in the first place. Locate replacement boards that are the exact size and length of your existing flooring.
Take up the existing boards and if necessary, fix any underlying problems that may have been caused by a water leak. Get your replacement boards and lay them down, lining them up carefully. Using the appropriate sized screws, attach them to the floor joists one by one until the area has been completely fixed. You may need to either paint or stain them to match your other flooring.
Massive Warps
This is a serious issue, and may require the help of a professional. Massive warping is usually caused either by extreme neglect, bad water damage or age. This will typically require replacing the entire floor, especially if numerous boards are affected. Locate any boards that may be saved, but check them for structural integrity. It is best to err on the side of caution when dealing with massive floor warps since it may be an indication that the wood is rotten.
Rip out the flooring. If you are replacing the entire floor, you have some options as to what materials you will use for the replacement, either new wooden floors, or a subfloor with carpeting. Fix any underlying damage and then install your new flooring option. Again, you may need to either paint or stain it to match, depending on how much of the original floor you were able to keep.
Photo Credits: 1
Related Articles
Related Stores
September 16th, 2008 — Flooring, Handy Man, carpet
Whether you are ready to replace an old, stained carpet, or you want to completely redo your flooring, it is vital to make sure that you know how to properly remove carpet. By using the right techniques, you’ll be assured of saving not only time, but your floors will go through a lot less damage. Before we get started, it’s a good idea to have some kneepads, since you will be kneeling, gloves, a carpet knife and a chisel.
The amount of work involved is going to depend largely on how the carpet was installed. We’ve seen cases of industrial glue applied directly to a floor and then a carpet was slapped on top of it. This was one of the hardest removal jobs we’ve ever done and it resulted in severely damaged floors. Hopefully, your carpets were installed professionally, but you’ll need to get an idea of what you’re working with before you get started.
Go to one corner of the room, preferably in the back where it won’t be noticeable. Take up a small section of carpet and see what method was used to attach it to the floor. If it is glued, you’ll see some yellow residue. This may be crumbling if the house is older and the carpets are original. This won’t be hard to remove at all, and shouldn’t take much time.
Some installers use carpet nails and these can be a little trickier. You’ll need to start by ripping out the carpet in one corner and then locating the little nails as you go. Depending on their size and how old the installation is, you may be able to just rip them out, or you may end up having to pry up each one.
Once you know how the carpet was installed, completely clear the room out from furniture and you’ll be ready to get started. It’s best to go back to that original place where you tore out a small piece of carpet. If it was glued, plant your feet and get a good grip on the carpet. This is where your gloves are really going to come in handy.
Start pulling backwards, using as much leverage as you can. You’ll have better results if you’re standing, and if the glue is really firm, you may even need a friend to help you. Pull up the carpet until you have a large portion that resembles a piece of pie. Now, go to the other corner and do the same thing.
Go to the two remaining corners and do the same thing until you have all of the carpet in the center of the room. Sometimes, the central part of the carpet will be the hardest to remove. Try rolling up what you’ve already removed and use leverage once again to try to rip it out. When you’re done, roll up the whole carpet and remove it from the room. If it was nailed down, we recommend using a small metal detector to find any small nails that may be hard to spot. You’re now ready to install your new flooring!
Photo Credits: 1
Related Articles
Related Stores
August 18th, 2008 — Flooring, Handy Man, Heating
Even though winter is the farthest thing from many minds right now, this is the perfect time to start thinking about your heating options. As heating oil and propane costs skyrocket, many homeowners are starting to think about different ways that they can save money on their heating costs. Here is a quick overview of the different options that are now available.
1. Wood stoves -
The old standard, but they still work. A wood stove should not be confused with a fireplace. These stoves are stand alone and must be vented through a pipe in the wall. They are incredibly efficient and can put out quite a lot of heat. Many are also made of materials that hold in the heat, making it last even longer. They do however require a lot of wood, which can be expensive and cumbersome to deal with. This option is best for those with plenty of storage space.
2. Corn stoves -
This is a new take on the old wood stove and it uses corn pellets to create heat. However, the popularity of ethanol has driven up the price of corn, and the weather may cause a great deal of shortages this coming winter. These stoves also have a tendency to leave a lot of black soot in the area and are not recommended for people with breathing disorders
3. Radiant floor heating -
This type of heating system utilizes small tubes that are placed in the flooring. Hot water is run through them on a constant basis, heating the room. These are pretty efficient, but very expensive to install. They are usually worth the effort, until one tube breaks and you have to rip up the flooring to replace it. This is usually best reserved for new home builds or those that are completely renovating their homes.
4. Electric baseboard or alcove heating -
These little heaters actually work pretty well and with the right installation, they can heat a whole room. There are still some complaints about cold pockets however with many of these heaters. The main downside is that they are usually not very energy efficient and can cause quite a drain on your wallet.
5. Central electric heating -
Right now, this may be the most economical choice for many homeowners. These furnaces are usually pretty efficient and run cleanly. You will need to change out the filters occasionally, but they are a great alternative if you’ve got a propane furnace that you need to replace.
6. Central propane heating -
As mentioned previously, propane prices are still quite high and these furnaces range from being very efficient to being very costly. Overall, they are probably the easiest to deal with, but right now, they are not the most economical. Until gas prices dip, many homeowners are just not willing to make the jump to switching to propane and with good reason. However, if your electric bills could already choke a horse, you may actually be able to save money in the long run with one of these furnaces.
Photo Credits: 1
Related Articles
Related Stores
June 20th, 2008 — Book Review, Ceramic, Countertops, Flooring, Tile
Black and Decker’s The Complete Guide to Ceramic and Stone Tile is a must read for anyone that is considering renovating their home. This is a great guide that makes it very simple to understand how to do even complex tasks and the project section alone makes it worth the cover price. This book is aimed at beginners but professionals should be able to learn a thing or two along the way.
The book opens with basics of ceramic and stone tile that walks the reader through the process of picking the right tile for their home, the kinds of tools they will need to complete various projects and how to prepare for a new tile installation. We appreciated this section since it does go into more information on the many different types of tile as well as their suggested uses. If you’ve always wanted a certain kind of tile, you may find that it’s really not meant for that purpose, so this is a great place to start before you end up spending too much money on tile selection.
This section provides an absolutely exhaustive list of the tools you’ll need and what purpose they serve. This is perfect for beginners who may not know exactly what they will need to get each type of job done. It also serves as a handy shopping list. Even the most complex tools are completely explained so that anyone can pick one up and begin using it properly.
The section on removing old flooring or countertops is very useful and contains some tips that will make the job go a lot faster. This is perfect for those who are not used to ripping out old tile and contains some safety tips that will make it a lot less dangerous for those who are new. In keeping with the times, this last section also includes a how-to on installing a floor warming system. This is not only energy efficient, but can greatly add to the value of your home. While you’ve got your old floor ripped out, you may as well take advantage of this new method of heating.
Moving on to the projects section, there are plenty of tasks here that will probably have you itching to redo something, anything in your home. They are all broken down so that anyone can follow them and get great results. You’ll get how-to’s on proper planning, and a material’s list that makes it even easier to make sure you have everything you need before you get started.
While it includes plenty of flooring and countertop how-to’s, we appreciated the projects on backsplashes, shower bases and the more extensive forms of flooring that include intricate designs. Everything is laid out logically and it very easy to follow.
Overall, this is an incredibly helpful book that more than deserves a place in your bookshelf. If you’ve got a tile project coming up, it’s definitely a must-have. Even if you don’t, after you read the book, you’ll undoubtedly want to start one.
Related Articles
Related Stores
