How to Weatherproof Your Deck

weatherproof deckAdding a deck can be a great way to increase the overall value of your home, but taking care of it is a whole other matter. Unless you purchased pre-sealed wood, you are going to have to take the time to maintain your deck, or your investment will quickly go to pieces. Here are some great tips on how to weatherproof your deck and make it easier to maintain.

Whether your deck is brand new or aged, these tips can make a big difference in the amount of work you do throughout the year on your deck. They will require a weekend, or maybe more time depending on your schedule, to complete. However, once you are done, you should not have to do much to your deck throughout the rest of the year, besides washing it occasionally.

Let’s get started!

1. Power wash the entire deck.


This is a vital step and will impact the finished results. Take the time to make sure that the deck is really clean, even in between the boards. A power washer will make short work of this chore, but you can also do the same thing with a hose and a pressure sprayer.

2. Sand the whole surface.


After the deck is completely dry, it’s time to sand down any damage, imperfections or snags. A power sander is recommended for this task, and will save you a lot of time and effort. Do at least one pass on all of the boards and make sure that they are completely smooth.

3. Sweep the deck.

Once you’re done power sanding, there will be some detritus left behind so it’s now time to completely sweep away all of your shavings. Take the time to make sure you get it all to avoid common cosmetic issues that we’ll talk about in our next step.

4. To seal or stain?

This step will depend on your personal preference. If the wood is already the right color or in good shape, sealing it should be sufficient. If not, you may need to stain it first. This can take up to 3 to 4 coats, depending on the depth and intensity of the desired finished color. Decide which method is right for you, and then double check to make sure that all of the shavings are gone.

Failing to do this will cause bubbles in the finish and may impact the overall effectiveness of your weatherization preparation. Make sure that your family knows they cannot walk on the deck until this process is completely done. It may take up to two coats of sealant, depending on the brand and how bad your wood is.

5. Make a note of the date.

You will probably need to redo this in about five years, so make sure you mark down in your home improvement journal when you finished weatherproofing the deck. By keeping your maintenance up to date, you can be assured that your deck will beautify your home for many years to come.

Photo Credit: 1

Related Articles Related Stores

How to Revitalize Your Woodwork

woodworkFew people know that proper care of woodwork requires much more than an occasional dusting. Your woodwork was once made up of a living thing, and without the proper care, it’s going to look quite dead. However, it is possible to revitalize your wood and keep it strong and healthy without much effort. If you’ve got an older home with a lot of woodwork, you may need to spend some extra time on it, but generally, these techniques should only take a few minutes.

Let’s start with revitalizing wood floors.

If you’re floor is already dried, cracked and the shine is completely gone, you’re going to need to do a major overhaul to bring it back. This means stripping the floor of any remaining varnish and re-staining it. This may take several coats depending on the color you would like. Once you’re done staining, you’ll need to revarnish the floor. In most cases, and especially with high traffic areas, this requires several coats and plenty of drying time in between. You need to keep the area as dust free as possible during this process so that the varnish stays smooth.

If you’re floor has seen better days but it’s not quite down for the count, you’ll need to add some oil to it to get it back. We recommend Murphy’s Wood Soap followed by Olde English Wood Oil. This comes in a few scents, but the lemon oil is probably the best for your floors. Completely wash the floor with Murphy’s and then add the oil to it once it is completely dry. You’ll really need to work that it and then give it plenty of time to dry since it will be a little slippery. Wood floors should have this done at least once a year to keep them looking fresh.

Moving on, let’s talk about the woodwork in your home, such as door frames, window sills and any built-ins you may have.

If the varnish is still in pretty good shape, but they’re looking a bit dull, you can try Murphy’s and Olde English to bring them back to life. Another great trick involves some olive oil on a soft rag. Gently work the oil into the wood until it has been completely absorbed. If the area is near curtains, take them down before you start to avoid staining them with oil.

If the woodwork is already dry and or damaged, you’ll need to strip it completely down and start over. For doors, it’s best to take them down to this so you don’t end up with drips in your stain or varnish. Otherwise, you’ll need to be careful and avoid overloading your brush with stain or varnish. This will help decrease the amount of drips. If you catch some while you’re still working, quickly brush them into the finish to disguise them.

The key to keeping your woodwork looking great is constant care and the right kind of cleaning products. Never use any cleaner on your wood that was not specifically made for wood. This will only strip the wood even further and make it harder to maintain.

Photo Credits: 1

Related Articles Related Stores