Installing a toilet is a lot easier than you might think and just about anyone can do it. Whether your old toilet is past its usefulness or you want to add a new one to match your décor, the process is pretty easy and should only take a few hours. Before you get started, you’re going to need a few basic tools. They include:
- plumber’s putty
- pipe wrenches to fit your pipes
- screwdrivers
- regular wrenches
- putty knife
- silicone
- an old rag
Let’s get started!
IMPORTANT: Not all new toilets come with the necessary parts. BEFORE you get started make sure that your new toilet has everything you need for installation. You can ask the store clerks where you got the toilet for more information.
First, you’re going to need to remove your old toilet. Turn the shutoff valve (it’s located right near the toilet) to the off position. Flush the toilet a few times and then mop up any excess water. Now, disconnect the water supply tube from the toilet. You may have some additional water here, but it shouldn’t be much. If necessary, place a sponge underneath it before you loosen the bolts. You may need to use your wrench if the area is corroded.
Once this is complete, you will then need to loosen the bolts on the toilet. Remove the little caps on either side of the base and undo these bolts. Again, you may need to use that wrench or a pair of pliers to get it going. In severe cases, you may need to hacksaw them off or use WD40 to loosen the bolts.
Now, you’re going to have to separate the old tank from the old bowl. Get your screwdriver and use it to hold the end of the bolt on the inside of the tank. Use your wrench to move the nut on the other side. Slowly remove the bolt and then rock the bowl from side to side. You’re going to want to do this pretty gently so you don’t damage the bowl. Once it’s loose, lift it out and place it in a safe place. Move the tank as well.
You’ll most likely notice a big hole in the floor and there may be a nasty smell coming out of it. This is the line to the sewer. Grab that old rag and stuff it into the hole (not too far or you’ll end up losing the rag and you’ll have to call a plumber to get it back.) You need to block this hole immediately or you will have dangerous sewer gases floating around your home and trust us, no one wants that.
Use that putty knife around this hole to scrape off any excess wax from the old gasket. Upend the new toilet and take your new gasket. Place it around the hole on the toilet and caulk it. Remove the rag from the sewer line and place the new toilet over it. Gently rock the new bowl into place until the seal is firm. Add on the new tank, attach the fittings inside and then bolt the new toilet down to the floor. Don’t overtighten those bolts or you will crack the bowl. Use your plumbers putty to attach the caps over the bolts. Reattach the water line and give her a flush!
Photo Credits: 1
Related Posts- How to Fix a Hole in the Wall Holes in the wall are pretty shocking when it happens, but luckily, this is a fix that most people can do on their own. There are a few exceptions, such as if the hole is overly large or if there may be underlying damage that is structural. However, in most......
- How to Drain Your Home's Water Pipes for Winter When winter comes around, the temperature drops and it gets to be time to bundle yourself up. Not all of your water pipes will get to enjoy the warmth of your home, so steps should be taken to ensure that the pipes do not get damaged by freezing water. If......
- How to Be Your Own Plumber The Easy Way Plumbing problems can be costly, but most of the time, they are relatively easy to fix, especially if you know what you’re doing. You can save thousands of dollars every year by learning how to be your own plumber and you’ll be gaining knowledge that can help you, especially in......
- Guide to Buying a Home Water Softener If your home’s water is excessively hard, it may be time to think about purchasing a water softener. If you are not sure if you have hard water, there are a few easy tests that will help you determine this. First and foremost, you can send a sample to a......
- How to Fix a Clogged Shower Drain If your showers are starting to feel more like a bath, thanks to the amount of standing water you have in your tub, it's definitely time to address some clogs. Bathtubs and showers have to deal with a lot of hair on a daily basis and it doesn't take......
