November 18th, 2008 — Doors, Handy Man, Install, Replace, Safety, locks
If you need to install new locks on your doors, there’s no need to call in a locksmith if you’ve got some basic DIY experience and you’re pretty handy. Today’s locks make it very easy to change them out and you won’t need many tools to get the job done. You will need:
- a screwdriver
- hammer
- chisel
- sandpaper
- drill
- in some cases, some adhesive.
Let’s get started! First, you’ll need to remove the old lock system. If it’s corroded, this can be pretty tough. If you can’t get it to come out of the door, try some WD40 to loosen it up. You may have to crank on those screws, but make sure that you don’t strip the heads or you’ll have a terrible time trying to get the lock out. Completely remove the lock mechanism and the plate that goes over the jamb.
Now, you’re going to need to measure the receptacle for the lock in your door jamb. If you’re using a similar lock, there shouldn’t be a problem in getting the tongue of the lock to fit into your door jamb. However, in some cases, you may need to widen the area. If the size difference is minimal, sandpaper will usually work to help create a better fit. If there is a big difference, slowly and carefully use your hammer and chisel to widen the area gradually. Don’t get too carried away or you’ll damage your door.
Once you’re sure that the tongue of your new lock will fit into the door jamb, you’re ready to get started. Separate the new lock into two pieces and insert the locking side first. Your door should already be sized to accept it. If not, you’ll need to change the shape of the hole with either sandpaper or a special saw. If you’re not comfortable with wood work, you’ll need to get someone else to widen this hole for you.
Attach the locking side to the door, making sure that it will line up perfectly with the second half before finishing. Now, get the second half of the lock and put it on the outside of the door. Place the two sides together and finish attaching them. Most new locks will come with instructions on how to accomplish this, so make sure you save them.
After this is done, you can install the new jamb plate and test the lock. It’s best to do this from the inside so you don’t get locked out if something goes wrong. We recommend fully testing the lock and the keys before you install it to cut down on any problems. It’s well worth the extra effort and you’ll keep from getting locked out. Although most prepackaged lock sets should be perfectly calibrated, there is always a chance that something might be a little off. Test it beforehand and you’ll have smooth sailing all the way. Make a copy of the key to put in a safe place and go relax - you just installed a new lock successfully!
Photo Credits: 1
Related Articles
Related Stores
November 16th, 2008 — Book Review, Handy Man, Maintain
The Carey brothers achieved great fame with their first Dummies title that focused on home renovation so hopes were pretty high with this latest book on how to maintain your home. This is an area that many people fail to understand how important it can be, which is why we decided to focus on this title first. No matter how much effort you put into renovating your home, if you don’t maintain it, there simply is no point.
The audience for the book is definitely beginners, or those that really don’t have a lot of time to familiarize themselves with a lot of DIY work. Weekend warriors might be a little disappointed in some of the tips, but overall, this is a great read. There are a few tips that everyone can use, regardless of their experience level and this is a book that deserves at least some space on your shelf.
We appreciated the fact that the book covered a lot of home maintenance ideas that are simply overlooked or never carried out. We all know that we need to keep our eaves clean, but how many of us know how to spot potential safety hazards in our home? This book covers pretty much everything you could ever need to do to keep your home running in tip top shape and chances are, if you follow this advice, you’ll find that you have a lot less repair and renovation work to do over the long term.
The section on how to prepare for freezing weather was particularly useful. It is all too easy to assume that everything is going to be alright, only to end knee deep in water. You’ll learn exactly how to winterize your home to make sure that this doesn’t happen. This one tip can save you hundreds in plumber fees and thousands in damages. They also cover some great winter tips for the rest of your house to make sure that the elements don’t over stress it.
The book takes you room by room, showing you what you need to look out for and how to take care of little problems before they become big problems. If you’re mystified by a lot of what goes on behind the scenes in your home, the systems section will make it completely easy to understand. This really is a perfect title for those that are getting into home ownership for the first time, especially if they are used to living in an apartment where all of this stuff is taken care of by the landlord.
The best part by far is the fact that the book includes calendars to help you schedule regular maintenance on your home. Everything from cleaning a fireplace to fixing cracks is covered and will end up saving you time and money on your home. We would have liked it if they had gone into gas fireplace tips as well, but overall, this is a terrific book that should be purchased by all homeowners.
Related Articles
Related Stores
September 8th, 2008 — Handy Man, Heating, Low Budget, insulation, pipes
Winter may be a few months away, but now is a great time to start getting ready for it. With energy prices on the rise, it is important to find ways to cut costs and reduce the amount of energy you use in the winter. Let’s go over a few quick ways to help lower your energy costs and get ready for winter.
First, one of the easiest ways to dramatically reduce your home heating costs is by sealing your windows. There are many different kinds of window kits available that will completely seal off any gaps or drafts. Summertime is a great time to purchase these kits since they will typically be marked down by 50% or more. This means instead of spending $5 or more per window, you can do it for about $2.50 a window. If you’ve got a lot of windows in your home, this can really add up.
Summer is also a good time to start thinking about your insulation and the shape it may be in. If your home is fairly new, you should not have to worry about this. However, if you have noticed that no matter what you do your house still feels pretty cold, poor insulation may be the culprit. Look at the R rating on your current insulation and double check to make sure that it is meant for your area. If it is, it may have degraded, or you may need a little more to make your house feel cozy.
If you have a forced air heating system, it’s time to get those filters out and replaced. Having a clean filter in your furnace can reduce your heating costs significantly. Once again, you can take advantage of summer discounts and stock up on filters for the entire year. You should be replacing them at least every month, or more if you live in a particularly dusty area.
For those with wood or pellet stoves stocking up on fuel now can make a big difference in how much you spend. If you’re trying to scramble to find pellets or wood during the peak periods, you’re definitely going to be paying more money. If you’ve got the space, start stocking up now. If you have a propane furnace, you can do almost the same thing.
Many gas companies are now offering propane contracts for the winter. What this means is that you agree to purchase a set amount of propane over the winter, usually around 1000 gallons, and they will offer you a lower price. You’ll also get the benefit of locking that price in, so that no matter how high it goes through the winter, you’ll still be paying that initial price. As gas prices continue to go up, this is a great way to save money.
Last but not least, start checking your pipes for leaks. If you live in an area that gets very cold, you may want to consider adding pipe insulation to avoid having to deal with frozen pipes in the future.
Photo Credits: 1
Related Articles
Related Stores
