How to Install a Toilet

November 14th, 2008 — Bathroom, Handy Man, Install, Replace, Toilet 

toiletInstalling a toilet is a lot easier than you might think and just about anyone can do it. Whether your old toilet is past its usefulness or you want to add a new one to match your décor, the process is pretty easy and should only take a few hours. Before you get started, you’re going to need a few basic tools. They include:

  • plumber’s putty
  • pipe wrenches to fit your pipes
  • screwdrivers
  • regular wrenches
  • putty knife
  • silicone
  • an old rag

Let’s get started!

IMPORTANT: Not all new toilets come with the necessary parts. BEFORE you get started make sure that your new toilet has everything you need for installation. You can ask the store clerks where you got the toilet for more information.

First, you’re going to need to remove your old toilet. Turn the shutoff valve (it’s located right near the toilet) to the off position. Flush the toilet a few times and then mop up any excess water. Now, disconnect the water supply tube from the toilet. You may have some additional water here, but it shouldn’t be much. If necessary, place a sponge underneath it before you loosen the bolts. You may need to use your wrench if the area is corroded.

Once this is complete, you will then need to loosen the bolts on the toilet. Remove the little caps on either side of the base and undo these bolts. Again, you may need to use that wrench or a pair of pliers to get it going. In severe cases, you may need to hacksaw them off or use WD40 to loosen the bolts.

Now, you’re going to have to separate the old tank from the old bowl. Get your screwdriver and use it to hold the end of the bolt on the inside of the tank. Use your wrench to move the nut on the other side. Slowly remove the bolt and then rock the bowl from side to side. You’re going to want to do this pretty gently so you don’t damage the bowl. Once it’s loose, lift it out and place it in a safe place. Move the tank as well.

You’ll most likely notice a big hole in the floor and there may be a nasty smell coming out of it. This is the line to the sewer. Grab that old rag and stuff it into the hole (not too far or you’ll end up losing the rag and you’ll have to call a plumber to get it back.) You need to block this hole immediately or you will have dangerous sewer gases floating around your home and trust us, no one wants that.

Use that putty knife around this hole to scrape off any excess wax from the old gasket. Upend the new toilet and take your new gasket. Place it around the hole on the toilet and caulk it. Remove the rag from the sewer line and place the new toilet over it. Gently rock the new bowl into place until the seal is firm. Add on the new tank, attach the fittings inside and then bolt the new toilet down to the floor. Don’t overtighten those bolts or you will crack the bowl. Use your plumbers putty to attach the caps over the bolts. Reattach the water line and give her a flush!

Photo Credits: 1

Related Articles Related Stores

No Comments

How to Be Your Own Plumber The Easy Way

August 19th, 2008 — Bathroom, Bathtub, Fix, Handy Man, Sink, pipes, plumbing 

plumbingPlumbing problems can be costly, but most of the time, they are relatively easy to fix, especially if you know what you’re doing. You can save thousands of dollars every year by learning how to be your own plumber and you’ll be gaining knowledge that can help you, especially in an emergency. Here are some tips on how to tackle the most common plumbing problems that homeowners experience.

First, you will need to get some solid plumbing books or DVDs that will walk you through the most common jobs. You can refer to these if you get stuck during a project. Having these books on hand can really make a difference, especially when you are under the wire. If you already know how to do basic plumbing, you’re just one step ahead. Try to get a variety of different books that cover not only basic pipe and drain issues, but also how to fix toilets and fixtures to make sure you have a well rounded library.

Next, you will need to make sure that you have the right tools on hand for the job. Here’s what we recommend: a variety of different pipe wrenches, appropriately sized for your house’s plumbing. It sounds simple, but many people find out too late that they don’t have the right wrench on hand during an emergency. It is also a good idea to purchase what is called a plumber’s snake. These are tools that can be used to quickly unclog a drain and they are very helpful.

It is also a good idea to have a variety of caulks, sealants and silicone on hand. These are very helpful when it comes to fixing a leak, or putting in new tile. Make sure that they are all properly closed so that you don’t end up with a bunch of dried out tubes when you really need them. Next, you should have a good supply of pipe fittings for your different pipes throughout the house. The hardware store will have a variety of elbow joints, end caps and other things that you will need. Measure your pipes and get everything that you need.

You should also keep a supply of drain cleaner, empty buckets, gloves and other small items that are usually required during a repair session. Make sure your tool box contains a propane blow torch, a variety of pliers and wrenches and anything else that your house may require. Keep all of your tools in a safe, dry place where they can be easily accessed. That way, when something does happen, you’ll be able to grab your stuff and get right to work.

Finally, it is a good idea to practice your skills from time to time, so that they don’t get rusty. If you have an extra bathroom, you can use this to try fixing a leak, cleaning out a drain or replacing the workings of your toilet. You’ll stay fresh and you’ll be ready to handle anything that comes your way.

Photo Credits: 1

Related Articles Related Stores

2 Comments