If your showers are starting to feel more like a bath, thanks to the amount of standing water you have in your tub, it’s definitely time to address some clogs. Bathtubs and showers have to deal with a lot of hair on a daily basis and it doesn’t take much for a clog to appear. Even with the best maintenance, chances are you’ll have to fight one or two every year.
There are a lot of different methods for cleaning a clogged drain, and we’ll cover the ones that are most effective. However, since using drain cleaners is not only bad for the environment, but also for your health, we won’t be covering that method. It is possible to end up with drain cleaner coming back up into your shower and the health risks from breathing the fumes are injurious to the health of your whole family. There are plenty of other easy ways to clean a clog that don’t involve harmful chemicals.
Now, before we get started, you’re going to need a few tools. We recommend:
- a screwdriver
- a pair of pliers
- a coat hanger
- a plumber’s snake (for serious leaks - they’re available at most hardware stores)
- some gloves (if you don’t want to get slimy)
First, you’re going to have to remove the top part of your shower drain. Most are screwed in, so gently loosen that screw with the appropriate type of screwdriver. You’re not going to want to crank on this since you can damage your tub. If it won’t budge, try a little WD40 if necessary.
Once this top part is off you should be able to get a better idea of the kind of clog you’re dealing with. Most clogs will be in this part of the drain, so you can simply pick the hair out until the area is cleaned up. If you don’t see much hair or anything else clogging this area, you’re going to have to go a little bit further. Most modern drains have a pattern inside that is made of hard plastic, so you can’t exactly go sticking your hand down there. We don’t recommend prying this part out since you can permanently damage your tub.
Unwrap that coat hanger and try feeding it gently down the drain. Probe around until you feel like you’ve hit the clog. You can try to pull it back up towards you or push it down further until it reaches a larger area of the pipe where it can be flushed away. For serious clogs we really recommend a plumber’s snake since they are easier to use than a coat hanger. Get rid of the clog and then put the drain back together again and you’re set.
If you have frequent clogs there’s an easy little recipe that you can use to make safe drain cleaner. Get some baking soda and put it down the drain. Then, grab some white vinegar and pour it in. The chemical reaction will clean out the pipe and keep it clean for you. You can do this once a month as a preventative. After you use the mixture, run some hot water down the drain to flush away any excess power.
Photo Credits: 1
Related Articles Related Stores
If you need to install new locks on your doors, there’s no need to call in a locksmith if you’ve got some basic DIY experience and you’re pretty handy. Today’s locks make it very easy to change them out and you won’t need many tools to get the job done. You will need:
